Baptistry Heaters

Baptistry water heaters are available with either electric or gas connections. All electric heaters need a GFCI (ground fault circuit interrupter) breaker, which is not included. The Immersion style heater can be plugged into a 120V regular household outlet or 240V dryer type outlet, but both need to be protected by a GFCI breaker. Be safe, be smart, all electric connections near water need GFI protection!

Model	Description - Price	View
Two Models 120 Volt 1.5 KW or 240 Volt 6 KW	1. Little Giant Immersion Heater - 120 V, 1500 W, 15 amp 240V, 6000 W, 30 amp This portable immersion heater is our most economical. The heater is mounted over the side of the baptistery with a stainless steel bracket (provided). Simply plug the pigtail cord into a 240 volt outlet, and set the thermostat to the desired temperature. No cutting or modification to existing baptistery Completely automatic and portable using 42” power cord (Included). Stainless Steel mounting bracket supplied for easy mounting High-limit cut off switch set at 125 degrees F. Immersion section of unit made of “Incoloy” or Stainless Steel. All heat confined to the formed horizontal section for optimum efficiency. Cold riser extends to the top of container where control housing is located. 3-Conductor cord set with polarized plug included. Adjustable vapor-proof thermostat control with range from 55° to 115° F. Indicator light and on-off switch indicate when desired temperature is reached and breaks circuit when element is not in use. 1 Year Manufacturer's Warranty Model 240 V Brochure Model 120 V Brochure Specifications Free shipping (48 states) on this model! Price: $410.00 plus FREE shipping $410.00 total	Note: The 120V Immersion Heater is designed for SMALL baptistries (under 150 gallons) such as the Portable Baptistry. For larger baptistries use the 240V or more than one of the 120V heaters. Use only with GFCI breaker protection!
Two Models Kit 6KW- 001 or Kit 11.5KW-001	*2. Basic Circulation Water Heater Little Giant - 6 or 11.5 KW* The Little Giant 6KW - 001 - Kit includes the 6 KW heater with the circulation pump. This has been the standard heater in use for over 40 years, and is still a favorite. It attaches directly to the side of your baptistry, with water coming in at the bottom, being heated, and pumped out at the top. (tub must be filled before using). The Little Giant 11.5KW-001 Kit includes the 11.5 KW heater, circulation pump, 24V transformer and 48 Amp Resistive Rating Contactor, all required to operate. One Year Manufacturer's Warranty. The 6KW unit can run on 120V or 240V (240 V preferred). Specifications Printable Brochure Prices: 6 KW - $480.00 FREE SHIPPING 11.5KW - $740.00 FREE SHIPPING SPECIAL - Mention Code 3000 when you order the 11.5 KW heater and get a Free #3000 Auto Fill System! Limited Time Offer
Two Models BES 6000 5.5 KW or BES 6005 11 KW	3. Deluxe Circulation Water Heater - Hydroquip 240 V The Hydroquip 240 V Circulation Heater features an stainless steel housing (no rust), a 1/2 HP pump motor, and thermostat control. Available in 5.5 KW and 11 KW sizes. The 5.5 will heat the average 500 gallon baptistry in 6 hours by 30 degrees F. The 11 KW will heat the same baptistry by 36 degrees F in about 4 hours. Can be installed up to 12 feet from baptistry. Heating indicator light. Adjustable thermostat. GFCI included. Air button On/Off switch. Receptacle for the optional Auto/Fill Drain Unit. Easy assembly required. One Year Ltd. Manufacturer's Warranty Specifications and More Info Prices: BES6000 $579.00 + UPS $48.00 = $627.00 BES6005 $679.00 + UPS $48.00 = $727.00	HydroQuip BES Baptismal Equipment System Larger View Product Features The Advantages of the BES system are its Stainless Steel Housing (no rust) and the ability to locate the heater up to 12' feet away from the baptistry for easy access.
	4. HotMatic® Gas Water Heater We have 6 models of gas water heaters available. They range from $1075-$1250.00. Three of the models run on LP gas. Three of the models run on natural gas. Information and Specifications