This kit will fill your
baptistry with water, turn off the water at the
preset level, then turn on the heater.
Includes Water Level Assembly, Water Fill
Assembly, System Interface Module, 1 Air button
and Tubing, 1 Water Level Wall fitting, 1
Water Fill Wall Fitting, 1 Overflow Wall Fitting. Model 48-0140F-K
# B - Optional Auto Drain Kit
- Drain the water easily with this accessory.
(Note: Requires that you also purchase Model
48-0140F-K
above).
Includes
Motorized 1 1/2" 2-way valve, 15' Cord with
plug, 2
drain / suction wall fittings
Model 48-0141-K
Special
- Order Kit A and B together for $629 with free
shipping!
# C - Optional BAPSIDE Remote
Control - Control temperature, pump and
heater from the side of the baptistry.
Our Bapside control includes a 25’ power cord
and 25’ temp sensor allowing the baptistry to be
conveniently operated remotely. The kit includes
3
air buttons and digital Temperature Control /
Display. Remote plugs directly into ChurchRite
Systems Control Box.
Special
- Order Kits A, B, and C for $869.00 together, with
free shipping!
Church
Checks Are Welcome!
Use Check by Fax for a
$10 Discount!
SAFETY POINTS:
The CR
Units come equipped with a GFCI, a device
designed to prevent shocks, and saving you
nearly $100 from having to purchase a separate
GFCI!
Our
equipment must be installed by a licensed
electrician in accordance with the NEC and any
State and/or Local codes in effect at the time
of installation.
This Deluxe Circulation Heater
features a stainless steel housing
(no rust), a 1/2 HP pump motor, and
thermostat control. Available in 5.5
KW and 11 KW sizes.
Both
have heating indicator light.
Each of our systems includes a high
current GFCI for safety, stainless
steel heater assembly and will
accept our optional Fill and Drain
kits. We also now include an air
button activated on/off switch for
convenience on each of our
ChurchRite control systems. Easy
assembly required. Note: a moderate
amount of chlorine or bromine may be
used in the water with this heater
to keep water in a sanitized
condition.
Advantages - stainless steel (no
rust) & you can place away from
baptistry for easy access!
CR6000 - 5.5 KW Water Heater
This model is for baptistries up to
750 gallons of water.
40-50 Amps, 5500 watts
Centrifugal pump, uses 1 1/2" PVC
and will heat the average 500 gallon
baptistry in 6-8 hours by about 30
degrees F.
Pump
is 120V - Heater 240 V
Can be
installed up to 12 plumbing feet
from baptistry.
Price:
CR6000
$599.00 + Shipping $30.00 = $629.00
CR6005
- 11 KW Water Heater
This model is for larger baptistries
up to 1500 gallons of water.
60-80 Amps, 11,000 watts
Centrifugal pump, uses 1 1/2" PVC
and will heat the average 500 gallon
baptistry in 4-5 hours by about 36
degrees F.
Pump
is 120V - Heater 240 V
Can be
installed up to 15 plumbing feet
from your baptistry.
Price:
CR6005 $699.00 + Shipping $30.00 =
$729.00
SHIPPING
INFO
Heaters are in stock for shipping
within 48 hours. Note: shipping
quoted is for delivery to the 48
continental US states. Call if you
are outside these areas. Shipping by
UPS in most cases.
Overnight delivery available - call
us!
ChurchRite equipment must be
installed by a licensed electrician
in accordance with the NEC and any
State and/or Local codes in effect
at the time of installation.
We now offer both the CR-6000T and
CR-6005T models with an optional
built in timer. The timer allows
7 day / 24 hour settings for heating
the water. This will be helpful for
churches that leave their baptistry
filled and ready to go!
The
CR-6000T model with timer now also
features a Titanium element.
Titanium elements are recommended
for churches that keep the baptistry
full as the element is protected
against the buildup of lime and
calcium.
1 - 800 -639 - 7397
.jpg){kind=link}
.jpg){kind=link}
