|
Deluxe Circulation Water Heater Specifications
-240 V
This Piedmont Circulation Heater
features a stainless steel housing (no rust), a 3/4 HP pump motor, and
thermostat control. Available in 5.5 KW and 10 KW sizes. Both
have heating indicator light.
You need to install this with GFCI connection.
Fifteen month manufactures warranty.
Advantages - stainless steel (no rust) & you can place away from baptistry for easy
access!
PBH
5.5 KW - 30 Amps, 5500 watts, 10 gauge wire needed
Centrifugal pump, uses 1 1/2" PVC and will heat the average 500 gallon
baptistry in 7 hours by 20 degrees. Pump is 120V - Heater 204 V
Can be installed up to 25 plumbing feet from
baptistry.
PBH5.5 KW Heater $595.00 + UPS $64.00 =
$659.00 total
PBH 10 KW - 50 Amps, 10,000 watts, 10 gauge wire needed
Centrifugal pump, uses 1 1/2" PVC and will heat the average 500 gallon
baptistry in 4 hours by 20 degrees. Pump is 120V - Heater 204 V
Can be installed up to 50 plumbing feet from
baptistry.
PBH10 KW Heater $695.00 + UPS $64.00 =
$759.00 total
SHIPPING INFO
Note: Free shipping on this item with baptistry order.
Heaters are in stock for shipping within 48
hours. Note: shipping quoted is for delivery to the 48 continental US states.
Call if you are outside these areas. Shipping by UPS in most cases. Overnight delivery
available - call us! |
