Specifications

 View

 120 V Model SS-1.5-42HL

240 V Model SS-6-42HL

This portable immersion heater is our most economical. The heater is mounted over the side of the baptistery with a stainless steel bracket (provided), or can be suspended in middle or end of pool. Simply plug the pigtail cord into a 240 volt outlet, and set the thermostat to the desired temperature.  No cutting or modification to existing baptistery. Completely automatic and portable using 42” power cord (Included). Stainless Steel mounting bracket supplied for easy mounting. High-limit cut off switch set at 125 degrees Immersion section of unit made of “Incoloy” or Stainless Steel. All heat confined to the formed horizontal section for optimum efficiency.  Cold riser extends to the top of container where control housing is located. 3-Conductor cord set with polarized plug included. Adjustable vapor-proof thermostat control with range from 55 to 115 degree F. The 240V heater will heat 60 Gallons per hour to a 40 degree rise.  A 750 - 1000 gallon tank will heat in 13 - 17 hours. If you select the 120V model, the  heater will operate at 120 volts and power will be reduced to 1.5 KW and will heat 15 GPH to 40 degree rise. No contractors required. Indicator light and on-off switch indicate when desired temperature is reached and breaks circuit when element is not in use. UL listed. Must be used in minimum 24" water. One year warranty.

Model SS-6-42HL  - 240 V   Brochure

Model SS-1.5-42HL -120 V  Brochure  

Optional - 240 V  Receptacle 

Surface or flush mounted  $35.00

Free shipping with heater order

SHIPPING INFO

Heaters are in stock for shipping within 48 hours. Note: shipping quoted is for delivery to the 48 continental US states.  Call if you are outside these areas.          

Overnight shipping available for an additional cost.

Measurements