You need
to install your heater with a
GFCI connection! Failure to do so can
result
in death or injury!
Note:
GFCI Breaker for 240V Poolside
The #230
Electrical Interrupter is designed to completely
turn off all power to the Baptistry Heating
Electrical System if there is a short of only 5
to 6 milliamps. This interrupter completely
protects people from electrical shock. Price
$89.00
Note: the 120V
Poolside version includes a free inline GFCI!
SHIPPING INFO
Heaters are in
stock for shipping within 48 hours. Note:
shipping quoted is for delivery to the 48
continental US states. Call if you are outside
these areas.
Overnight shipping
available for an additional cost.
The Poolside
heater is available in both 240V or 120V
(regular household current) models. The 120V is
only for portable baptistries up to 150 gallons.
The 240V model has 3 times the heating capacity
of the 120V, and will heat 750 gallons.
This new baptistry heater is our
most economical to operate. The
heater is mounted for easy use
and accessibility, then attaches
to the 2 15' long garden hoses
(included), which extend into
the pool. No drilling or
plumbing needed! One hose
connects to the commercial grade
1/6 HP submersible pump which
pumps the water from the pool to
the heater, then back again into
the pool. The submersible pump
plugs into the back of the
heater unit so all are under the
protection of the GFCI plug
(included with the 120V system -
you provide with the 240V
system).
Simply plug the cord into a 120
volt standard outlet or 240 volt
outlet, push the power button,
and set the thermostat to the
desired temperature.
This unit is not for continuous
use, if you need to have one on
all the time select the
Basic or
Deluxe models.
No
cutting or modification to
existing baptistery!
UL Listed - Safe!
120V Model is GFCI
Protected
120V Model plugs into a
standard 15 amp outlet,
uses about 10 amps
240V Model plugs into a
dryer type outlet, uses
about 18 amps
240V is NOT GFCI
protected, you will need
to add a GFCI breaker
(see at left)
Includes 15' power cord
for convenience
Heater operates at a
safe distance
Pump recirculates and
mixes the warm water
Max temp is 104°F
240V System uses 30%
Less Power than other
systems!
Pump can be set to Drain
Pool
Thermal Overload
Protection
Easy to use and store,
18 lbs.
A "Comfort Zone" range
has been provided to
give the user the most
desired range of
temperatures 75°F - 90°F
1 Year Manufacturer's
Warranty
USES 30% LESS POWER THAN TRADITIONAL
HEATERS
(MODEL CPR240)
NO PLUMBING OR DRILLING OF
BAPTISTRY!
WHAT'S
IN THE BOX?
The Poolside Kit
comes complete with all components
for installation and use. The 120V
system includes the heater,
submersible pump, 2 hoses, fittings,
a base for the heater, and the GFI
plug is included. The 240V system
includes all these except the GFI
plug, and you will need to install
the receptacle using a GFCI breaker.
See below at left for more info.
Note:
The 120V Immersion Heater is
designed for SMALL baptistries
(under 150 gallons) such as the
Portable Baptistry.
For larger
baptistries up to 750 gallons use
the 240V PL240 Heater or purchase
more than one of the 120V heaters.
For baptistries
over 750 gallons we recommend the
Deluxe System
1 - 800 -639 - 7397
