The #10 Portable Baptistry Water Heater will
heat 100 gallons by a 20° rise in temperature
each 9-12 hours, depending on ambient (room)
temperature, not to exceed 105°F. Water comes
from the ground at 54°F.
To get the average portable pool to a
correct temp for baptizing will take overnight
or all day heating, more if the room is cold.
#10 Portable Baptistry Water
Heater Specifications
Model
Specifications
View
Model
10
120 V
only
#10 Immersion Water
Heater
For Portable Baptistries
Specifications
120 V - Standard Household Plug
This portable immersion heater is
our most economical. The heater is
laid down in the portable baptistry.
This unit is designed for safe easy
use, but it is not fast.
It will take 24 - 36 hours to heat
your portable baptistry.
·
Designed for easy, safe use
·
Will not burn out if left out of
water
·
The outer surface never overheats
·
Manufactured with Teflon®
heating element
·
Internal elements are ceramic
·
Energy Efficient - uses 1/3 the
electricity of other heaters
·
1000 Watts ●120
volts standard electric
●
8.3 Amps
·
Uses only 2-3 amps during heating
·
Preset thermostat cuts on at 85
off at 105°
·
Silicone bumpers allow unit to rest
without touching fiberglass
·
Built in GFCI (ground fault circuit
interrupter) for additional safety
·
Just place in water, lay down, and
plug in 12-24 hours before use
·
Note it does not circulate the
water, so you may need to stir it
before the service
·
For added safety, remove from pool
before baptism service or use
